Fabrication and Sc-Refinement of SiCp/A356 Composites by Vacuum Stirring Casting Method

Fabrication and Sc-Refinement of SiCp/A356 Composites by Vacuum Stirring Casting Method

Aluminum matrix composites reinforced with 10 vol.% SiC particles (SiCp/Al MMCs) were prepared throughthe vacuum stirring method from SiC particles preoxidated at high temperature, followed by posttreatments of remelting and Sc addition treatment. Major problems during vacuum stirring preparation we...

Full description

Saved in:

Bibliographic Details
Main Authors:	Fukun Chen, Kuangfei Wang
Format:	Article
Language:	English
Published:	Wiley 2022-01-01
Series:	Journal of Electrical and Computer Engineering
Online Access:	http://dx.doi.org/10.1155/2022/5460706
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Strengthening mechanism of particle gradation in 55 vol% SiCp/6061Al composites fabricated by semi-solid hot isostatic pressing
by: Kun Cheng, et al.
Published: (2025-01-01)

Hot Deformation Behavior and Workability Characteristic of SiCp/Al-Cu-Mg-Ag Composite
by: Ning Li, et al.
Published: (2025-01-01)

Investigation on influence of SiCp on three-body abrasive wear behaviour of glass/epoxy composites
by: Ajith G. Joshi, et al.
Published: (2021-04-01)

The Microstructure and Thermal Conductivity of Pressureless Infiltrated SiCp/Al Composites Containing Electroless Nickel Platings
by: Aihua Zou, et al.
Published: (2015-01-01)

Effects of High-Density Pulse Currents on the Solidification Structures of Cu-SiCp/AZ91D Composites
by: Xi Hao, et al.
Published: (2019-01-01)

Tuning lamella spacings for simultaneous strength-ductility improvements in heterogeneous lamella SiCp/2024Al composites
by: Kan Liu, et al.
Published: (2025-01-01)

Effect of SiC Particle Incorporated Dielectric Medium on Electrical Discharge Machining Behavior of AA6061/B4Cp/SiCp AMCs
by: Johny Khajuria, et al.
Published: (2022-01-01)

Retracted: Effect of SiC Particle Incorporated Dielectric Medium on Electrical Discharge Machining Behavior of AA6061/B4Cp/SiCp AMCs
by: Advances in Materials Science and Engineering
Published: (2023-01-01)

Effect of Electrode Material Variations on Wear Characteristics of Stir Cast A356/Red Mud/TiC Hybrid Metal Matrix Composite During Electrical Discharge Machining
by: Debasmita Pani, et al.
Published: (2024-12-01)

REFINEMENT OF CASTINGS AT CASTING BY DIRECTIONAL HARDENING
by: E. I. Marukovich, et al.
Published: (2005-05-01)

A Systematic Review on the Mechanical, Tribological, and Corrosion Properties of Al 7075 Metal Matrix Composites Fabricated through Stir Casting Process
by: M. Sambathkumar, et al.
Published: (2023-01-01)

Synthesis and Characterization of Mechanical Properties of AA8014 + Si3N4/ ZrO2 Hybrid Composites by Stir Casting Process
by: C. Ramesh Kannan, et al.
Published: (2022-01-01)

Impact of AlN-SiC Nanoparticle Reinforcement on the Mechanical Behavior of Al 6061-Based Hybrid Composite Developed by the Stir Casting Route
by: S. Kaliappan, et al.
Published: (2022-01-01)

Influence of Tool Pin Profiles on Aluminium Alloy A356 and Ceramic-Based Nanocomposites for Light Weight Structures by Friction Stir Processing
by: L. Karthick, et al.
Published: (2024-01-01)

Fatigue crack paths and properties in A356-T6 aluminum alloy microstructurally modified by friction stir processing under different conditions
by: A. Tajiri, et al.
Published: (2015-09-01)

The effect of SiC and Y2O3 inclusion on microstructure and mechanical properties of Al 5052 composite fabricated through Friction Stir Process
by: Panneerselvam Natarajan, et al.
Published: (2025-01-01)

How Slight Solidification Rate Variations within Cast Plate Affect Mechanical Response: A Study on As-Cast A356 Alloy with Cu Additions
by: Maria Teresa Di Giovanni, et al.
Published: (2018-01-01)

Synthesis, Mechanical, and Tribological Performance Analysis of Stir-Casted AA7079: ZrO2 + Si3N4 Hybrid Composites by Taguchi Route
by: G. Jegan, et al.
Published: (2021-01-01)

Microstructure and Mechanical Properties of Aluminum Cast Alloy A356 reinforced with Dual-Size B4C Particles
by: J. R. Chandrashekar, et al.
Published: (2021-06-01)

The Effect of Stir-Squeeze Casting Process Parameters on Mechanical Property and Density of Aluminum Matrix Composite
by: S. Vijayakumar, et al.
Published: (2022-01-01)

Characteristics of A6061/(Glass Fibre + AL2O3 + SiC + B4C) Reinforced Hybrid Composite Prepared through STIR Casting
by: Subramani Nanjan, et al.
Published: (2019-01-01)

Retracted: Synthesis, Mechanical, and Tribological Performance Analysis of Stir-Casted AA7079: ZrO2 + Si3N4 Hybrid Composites by Taguchi Route
by: Advances in Materials Science and Engineering
Published: (2023-01-01)

A Comparative Study of the Impact of the Stirrer Design in the Stir Casting Route to Produce Metal Matrix Composites
by: Farooq Muhammad, et al.
Published: (2021-01-01)

VACUUM MOULDING PROCESS - PRODUCTION OF HIGH QUALITY CASTINGS
by: Constanze Muschna
Published: (2004-02-01)

Microstructure and properties of SiC particle reinforced AA7075 composites by friction stir processing
by: Yuhan Duan, et al.
Published: (2025-01-01)

Vacuum vaporizer for fabrication of thin films of material by sublimations
by: A. I. Blesman, et al.
Published: (2019-12-01)

Investigation on Mechanical Behaviour of LM6 Aluminum Alloy Hybrid Composites Processed Using Stir Casting Process
by: S. Suresh Pungaiah, et al.
Published: (2022-01-01)

SS316/CCA laminated metal composite fabricated by additive friction stir deposition: Microstructure and mechanical properties
by: Ravi Sankar Haridas, et al.
Published: (2025-03-01)

EFFECT VARIATION OF TEMPERATURE AND STIRRING SPEED ON THE BENDING TEST OF FIBERGLASS FIBER COMPOSITE MATERIALS USING THE VACUUM ASSISTED RESIN INFUSION (VARI) METHOD
by: Ferry Setiawan, et al.
Published: (2024-12-01)

Technology of special castings fabrication using die casting method
by: S. I. Pereborchikov
Published: (2003-08-01)

Fabrication of SiC@Cu/Cu Composites with the Addition of SiC@Cu Powder by Magnetron Sputtering
by: Zhang Yunlong, et al.
Published: (2021-01-01)

Refinement of the co-content function, through an integration of a polynomial fit of $$I-{I}_{sc}$$ I - I sc . Part 1 theoretical analysis and proposal
by: Victor-Tapio Rangel-Kuoppa
Published: (2024-12-01)

Improvement of microstructure and mechanical properties for Al7075 aluminium reinforced with hybrid graphite and SiC particles via a combination of mechanical alloying and stir casting
by: Charinrat Potisawang, et al.
Published: (2025-01-01)

Refinement of the Co-Content function, through an integration of a polynomial fit of $$I-{I}_{sc}$$ I - I sc . Part 2 application to experimental current–voltage curves
by: Victor-Tapio Rangel-Kuoppa
Published: (2025-01-01)

Ultrasonic assisted stir squeeze casting of AA5456/Al2O3–SiC-Gr-MoS2 hybrid nanocomposites: Microstructure and strengthening analysis
by: B.N. Akash Deep, et al.
Published: (2025-01-01)

Modeling Forced Flow Chemical Vapor Infiltration Fabrication of SiC-SiC Composites for Advanced Nuclear Reactors
by: Christian P. Deck, et al.
Published: (2013-01-01)

Seurat function argument values in scRNA-seq data analysis: potential pitfalls and refinements for biological interpretation
by: Mikhail Arbatsky, et al.
Published: (2025-02-01)

Mechanical alloying of iron-coated NbC and Si in stirred media mill
by: Al-Azzawi A., et al.
Published: (2019-01-01)

Mechanical characterization and analysis of tensile fracture modes of ultrasonically stir cast Al6082 composites reinforced with Cu powder premixed Metakaolin particles
by: Renjin J Bright, et al.
Published: (2022-09-01)

Optimization of Reinforced Aluminium Scraps from the Automobile Bumpers with Nickel and Magnesium Oxide in Stir Casting
by: V. Vijayan, et al.
Published: (2021-01-01)