Stability study of Fluconazole capsules with Bracketing Design
International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH) guidelines provide guidance for stability monitoring of medicines which Food and Drug Administration (FDA) and European Medicines Agency (EMA) refer to. A full stability study design is descri...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
University Ss Cyril and Methodius in Skopje, Faculty of Pharmacy and Macedonian Pharmaceutical Association
2024-12-01
|
| Series: | Makedonsko Farmacevtski Bilten |
| Subjects: | |
| Online Access: | https://bulletin.mfd.org.mk/volumes/Volume%2069_1/69_1_007.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH) guidelines provide
guidance for stability monitoring of medicines which Food and Drug Administration (FDA) and European Medicines Agency (EMA) refer
to. A full stability study design is described as a model in which samples under the influence of appropriate factors are tested at all-time
points. Bracketing and matrixing stability study designs represent reduced designs that may be a suitable alternative to a full stability design.
Bracketing design refers to the stability such that only samples on the extremes of certain design are tested at all-time points as in a full
design, whereas the stability of the intermediate levels is represented by the stability of the tested extremes, which reduces costs and time
analysis. The design assumes that the stability of any intermediate levels is represented by the stability of the extremes tested.
Bracketing design of four different dosage strengths of Fluconazole hard capsules is included in this research. The extreme strengths
were chosen and parameters average mass of capsule contents, disintegration, dissolution, assay of active and related substances, according
to shelf-life specification were tested in accelerated and long-term stability conditions. Based on the obtained results, the stability of any
intermediate levels is confirmed by the stability of the tested extremes and show that this reduced design is suitable.
|
|---|---|
| ISSN: | 1857-8969 |