Selective Flotation of a Copper-molybdenum Bulk Concentrate from Xizang
This is an article in the field of mineral processing engineering. A technological mineralogical study was carried out on a copper-molybdenum bulk concentrate in Xizang. Studies have shown that the copper-molybdenum bulk concentrate contains 19.00% Cu and 0.38% Mo, and the grade of molybdenum is rel...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | zho |
| Published: |
Institute of Multipurpose Utilization of Mineral Resources, Chinese Academy of Geological Sciences
2024-12-01
|
| Series: | Kuangchan zonghe liyong |
| Subjects: | |
| Online Access: | http://www.kczhly.com/en/article/doi/10.3969/j.issn.1000-6532.2024.06.018 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1841527038611030016 |
|---|---|
| author | Jinming GUO Hongying YANG Shiqi ZHANG Linlin TONG Zhenan JIN Qin ZHANG |
| author_facet | Jinming GUO Hongying YANG Shiqi ZHANG Linlin TONG Zhenan JIN Qin ZHANG |
| author_sort | Jinming GUO |
| collection | DOAJ |
| description | This is an article in the field of mineral processing engineering. A technological mineralogical study was carried out on a copper-molybdenum bulk concentrate in Xizang. Studies have shown that the copper-molybdenum bulk concentrate contains 19.00% Cu and 0.38% Mo, and the grade of molybdenum is relatively low. The main reasons for this are the low separation efficiency of copper and molybdenum and the poor quality of molybdenum concentrates. The optimal grinding fineness, pulp concentration and agent system are determined through condition tests: the mixed concentrate is not ground, that is, the particle size -0.045 mm accounts for 67.87%, the pulp concentration is 40%, and the mixed inhibitor sodium hydrosulfide: sodium thioglycolate=2.5:1. The dosage of mixed inhibitor is 5 000 g/t, sodium silicate is 1 500 g/t, kerosene is 80 g/t, pinitol oil is 24 g/t, AT208 300 g/t is added in the third step, and the fourth step is added scrubbing process. After one roughing separation, seven cleaning separations and two scavenging swparations of the closed-circuit test, the finally obtained molybdenum concentrate contains 46.50% molybdenum, 0.94% copper, and the recovery rate of molybdenum is 80.76%, the copper concentrate contains 19.12% copper and 0.07% molybdenum, and the recovery rate of copper is 99.97%, and copper and molybdenum achieved good separation. |
| format | Article |
| id | doaj-art-9048170382644360b4e0ff1eb3f1583a |
| institution | Kabale University |
| issn | 1000-6532 |
| language | zho |
| publishDate | 2024-12-01 |
| publisher | Institute of Multipurpose Utilization of Mineral Resources, Chinese Academy of Geological Sciences |
| record_format | Article |
| series | Kuangchan zonghe liyong |
| spelling | doaj-art-9048170382644360b4e0ff1eb3f1583a2025-01-16T07:32:24ZzhoInstitute of Multipurpose Utilization of Mineral Resources, Chinese Academy of Geological SciencesKuangchan zonghe liyong1000-65322024-12-0145611712310.3969/j.issn.1000-6532.2024.06.0182024-06guojinmingSelective Flotation of a Copper-molybdenum Bulk Concentrate from XizangJinming GUO0Hongying YANG1Shiqi ZHANG2Linlin TONG3Zhenan JIN4Qin ZHANG5Key Laboratory of Ecological Metallurgy of Polymetallic Symbiotic Ore, Ministry of Education, School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, ChinaKey Laboratory of Ecological Metallurgy of Polymetallic Symbiotic Ore, Ministry of Education, School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, ChinaKey Laboratory of Ecological Metallurgy of Polymetallic Symbiotic Ore, Ministry of Education, School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, ChinaKey Laboratory of Ecological Metallurgy of Polymetallic Symbiotic Ore, Ministry of Education, School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, ChinaKey Laboratory of Ecological Metallurgy of Polymetallic Symbiotic Ore, Ministry of Education, School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, ChinaKey Laboratory of Ecological Metallurgy of Polymetallic Symbiotic Ore, Ministry of Education, School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, ChinaThis is an article in the field of mineral processing engineering. A technological mineralogical study was carried out on a copper-molybdenum bulk concentrate in Xizang. Studies have shown that the copper-molybdenum bulk concentrate contains 19.00% Cu and 0.38% Mo, and the grade of molybdenum is relatively low. The main reasons for this are the low separation efficiency of copper and molybdenum and the poor quality of molybdenum concentrates. The optimal grinding fineness, pulp concentration and agent system are determined through condition tests: the mixed concentrate is not ground, that is, the particle size -0.045 mm accounts for 67.87%, the pulp concentration is 40%, and the mixed inhibitor sodium hydrosulfide: sodium thioglycolate=2.5:1. The dosage of mixed inhibitor is 5 000 g/t, sodium silicate is 1 500 g/t, kerosene is 80 g/t, pinitol oil is 24 g/t, AT208 300 g/t is added in the third step, and the fourth step is added scrubbing process. After one roughing separation, seven cleaning separations and two scavenging swparations of the closed-circuit test, the finally obtained molybdenum concentrate contains 46.50% molybdenum, 0.94% copper, and the recovery rate of molybdenum is 80.76%, the copper concentrate contains 19.12% copper and 0.07% molybdenum, and the recovery rate of copper is 99.97%, and copper and molybdenum achieved good separation.http://www.kczhly.com/en/article/doi/10.3969/j.issn.1000-6532.2024.06.018mineral processing engineeringcopper-molybdenum bulk concentrateseparation of copper-molybdenumsodium thioglycolatemolybdenum concentraterecovery rate |
| spellingShingle | Jinming GUO Hongying YANG Shiqi ZHANG Linlin TONG Zhenan JIN Qin ZHANG Selective Flotation of a Copper-molybdenum Bulk Concentrate from Xizang Kuangchan zonghe liyong mineral processing engineering copper-molybdenum bulk concentrate separation of copper-molybdenum sodium thioglycolate molybdenum concentrate recovery rate |
| title | Selective Flotation of a Copper-molybdenum Bulk Concentrate from Xizang |
| title_full | Selective Flotation of a Copper-molybdenum Bulk Concentrate from Xizang |
| title_fullStr | Selective Flotation of a Copper-molybdenum Bulk Concentrate from Xizang |
| title_full_unstemmed | Selective Flotation of a Copper-molybdenum Bulk Concentrate from Xizang |
| title_short | Selective Flotation of a Copper-molybdenum Bulk Concentrate from Xizang |
| title_sort | selective flotation of a copper molybdenum bulk concentrate from xizang |
| topic | mineral processing engineering copper-molybdenum bulk concentrate separation of copper-molybdenum sodium thioglycolate molybdenum concentrate recovery rate |
| url | http://www.kczhly.com/en/article/doi/10.3969/j.issn.1000-6532.2024.06.018 |
| work_keys_str_mv | AT jinmingguo selectiveflotationofacoppermolybdenumbulkconcentratefromxizang AT hongyingyang selectiveflotationofacoppermolybdenumbulkconcentratefromxizang AT shiqizhang selectiveflotationofacoppermolybdenumbulkconcentratefromxizang AT linlintong selectiveflotationofacoppermolybdenumbulkconcentratefromxizang AT zhenanjin selectiveflotationofacoppermolybdenumbulkconcentratefromxizang AT qinzhang selectiveflotationofacoppermolybdenumbulkconcentratefromxizang |