Static assessment of brittle/ductile notched materials: an engineering approach based on the Theory of Critical Distances
Engineering components often contain notches, keyways or other stress concentration features. These features raise the stress state in the vicinity of their apex which can lead to unexpected failure of the component. The Theory of Critical Distances has been proven to predict accurate results, but...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Gruppo Italiano Frattura
2014-10-01
|
| Series: | Fracture and Structural Integrity |
| Subjects: | |
| Online Access: | http://www.gruppofrattura.it/pdf/rivista/numero30/numero_30_art_4.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1841562244796645376 |
|---|---|
| author | R. Louks H. Askes L. Susmel |
| author_facet | R. Louks H. Askes L. Susmel |
| author_sort | R. Louks |
| collection | DOAJ |
| description | Engineering components often contain notches, keyways or other stress concentration features. These
features raise the stress state in the vicinity of their apex which can lead to unexpected failure of the component. The
Theory of Critical Distances has been proven to predict accurate results, but, conventionally, requires two key ingredients
to be implemented: the first is a stress-distance curve which can be obtained relatively easily by means of any finite
element software, the second is two additional material parameters which are determined by running appropriate
experiments. In this novel reformulation, one of these additional parameters, namely the critical distance, can be
determined a priori, allowing design engineers to assess components whilst reducing the time and cost of the design
process.
This paper investigates reformulating the Theory of Critical Distances to be based on two readily available material
parameters, i.e., the Ultimate Tensile Strength and the Fracture Toughness. An experimental data base was compiled from
the technical literature. The investigated samples had a range of stress concentration features including sharp V-notches to
blunt U-notches, and a range of materials that exhibit brittle, quasi-brittle and ductile mechanical behaviour. Each data set
was assessed and the prediction error was calculated. The failure predictions were on average 30% conservative, whilst the
non-conservative predictions account for less than 10% of the tested data and less than 2% of the non-conservative error
results exceed -20%. It is therefore recommended that a safety factor of at least 1.2 is used in the implementation of this
version of the Theory of Critical Distances. |
| format | Article |
| id | doaj-art-62c8f1ff7123429296d4d2622d634e7e |
| institution | Kabale University |
| issn | 1971-8993 1971-8993 |
| language | English |
| publishDate | 2014-10-01 |
| publisher | Gruppo Italiano Frattura |
| record_format | Article |
| series | Fracture and Structural Integrity |
| spelling | doaj-art-62c8f1ff7123429296d4d2622d634e7e2025-01-03T01:03:18ZengGruppo Italiano FratturaFracture and Structural Integrity1971-89931971-89932014-10-01830233010.3221/IGF-ESIS.30.04 Static assessment of brittle/ductile notched materials: an engineering approach based on the Theory of Critical DistancesR. Louks 0H. Askes 1L. Susmel 2Department of Civil and Structural Engineering, The University of Sheffield Department of Civil and Structural Engineering, The University of Sheffield Department of Civil and Structural Engineering, The University of Sheffield Engineering components often contain notches, keyways or other stress concentration features. These features raise the stress state in the vicinity of their apex which can lead to unexpected failure of the component. The Theory of Critical Distances has been proven to predict accurate results, but, conventionally, requires two key ingredients to be implemented: the first is a stress-distance curve which can be obtained relatively easily by means of any finite element software, the second is two additional material parameters which are determined by running appropriate experiments. In this novel reformulation, one of these additional parameters, namely the critical distance, can be determined a priori, allowing design engineers to assess components whilst reducing the time and cost of the design process. This paper investigates reformulating the Theory of Critical Distances to be based on two readily available material parameters, i.e., the Ultimate Tensile Strength and the Fracture Toughness. An experimental data base was compiled from the technical literature. The investigated samples had a range of stress concentration features including sharp V-notches to blunt U-notches, and a range of materials that exhibit brittle, quasi-brittle and ductile mechanical behaviour. Each data set was assessed and the prediction error was calculated. The failure predictions were on average 30% conservative, whilst the non-conservative predictions account for less than 10% of the tested data and less than 2% of the non-conservative error results exceed -20%. It is therefore recommended that a safety factor of at least 1.2 is used in the implementation of this version of the Theory of Critical Distances.http://www.gruppofrattura.it/pdf/rivista/numero30/numero_30_art_4.pdfTheory of Critical DistancesStatic FractureNotchesDesign. |
| spellingShingle | R. Louks H. Askes L. Susmel Static assessment of brittle/ductile notched materials: an engineering approach based on the Theory of Critical Distances Fracture and Structural Integrity Theory of Critical Distances Static Fracture Notches Design. |
| title | Static assessment of brittle/ductile notched materials: an engineering approach based on the Theory of Critical Distances |
| title_full | Static assessment of brittle/ductile notched materials: an engineering approach based on the Theory of Critical Distances |
| title_fullStr | Static assessment of brittle/ductile notched materials: an engineering approach based on the Theory of Critical Distances |
| title_full_unstemmed | Static assessment of brittle/ductile notched materials: an engineering approach based on the Theory of Critical Distances |
| title_short | Static assessment of brittle/ductile notched materials: an engineering approach based on the Theory of Critical Distances |
| title_sort | static assessment of brittle ductile notched materials an engineering approach based on the theory of critical distances |
| topic | Theory of Critical Distances Static Fracture Notches Design. |
| url | http://www.gruppofrattura.it/pdf/rivista/numero30/numero_30_art_4.pdf |
| work_keys_str_mv | AT rlouks staticassessmentofbrittleductilenotchedmaterialsanengineeringapproachbasedonthetheoryofcriticaldistances AT haskes staticassessmentofbrittleductilenotchedmaterialsanengineeringapproachbasedonthetheoryofcriticaldistances AT lsusmel staticassessmentofbrittleductilenotchedmaterialsanengineeringapproachbasedonthetheoryofcriticaldistances |