Micro-X-ray-CT for analysis of particle size segregation during powder spreading in Binder Jet Printing

Micro-X-ray-CT for analysis of particle size segregation during powder spreading in Binder Jet Printing

The uniformity of the powder bed in Binder Jet Printing can impact the final properties of additively manufactured components. Granular flow phenomena, such as particle size segregation can influence the uniformity of the powder bed. Due to the 3D nature of the powder bed and the standard requiremen...

Full description

Saved in:

Bibliographic Details
Main Authors:	Julia G. Behnsen, Joseph W. Roberts, Oliver J. Rogan, James M. McArdle, Kate Black
Format:	Article
Language:	English
Published:	Elsevier 2025-02-01
Series:	Additive Manufacturing Letters
Subjects:	X-ray computed tomography Binder jetting Additive manufacture Particle size distribution packing density In-layer particle size segregation
Online Access:	http://www.sciencedirect.com/science/article/pii/S2772369024000744
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

NEW CHALLENGES IN ABRASIVE WATER JET MACHINING
by: CATALINA CIOFU, et al.
Published: (2019-12-01)

Enhanced green density of binder jetted tungsten heavy alloys with an inorganic metal salt binder
by: Yuhua Heng, et al.
Published: (2025-03-01)

Size Effect of Sandstone Particle Crushing Strength and Aggregate Shear Strength Based on Nominal Particle Size
by: QIU Zhenfeng, et al.
Published: (2024-09-01)

Development of a high-temperature Inconel 625 heat exchanger by model design and binder jetting additive manufacturing
by: Wenchao Du, et al.
Published: (2025-03-01)

Experimental investigation of the effect of the offset ratio on the flow characteristics and heat transfer behaviour of a wall-bounded dual jet flow
by: P.J. Murphy, et al.
Published: (2025-03-01)

Methodology for Analyzing Powder-Based Fire Extinguishing and Its Optimization
by: Amir Shalel, et al.
Published: (2025-01-01)

Hydrothermal Synthesis of CuO Nanoparticles: Tailoring Morphology and Particle Size Variations for Enhanced Properties
by: Tijen Ennil Bektaş, et al.
Published: (2024-06-01)

Binder jet 3D printing of 316L stainless steel: A Taguchi analysis of the dependence of density and mechanical properties on the printing parameters
by: M. Zago, et al.
Published: (2025-01-01)

Mechanical responses of triply periodic minimal surface gyroid lattice structures fabricated by binder jetting additive manufacturing
by: Yingmi Xie, et al.
Published: (2025-03-01)

Movement and distribution of particles in the tank of jet and agitation combined flotation machine
by: Tao WANG, et al.
Published: (2024-12-01)

Influence of Regional Pollution Outflow on Particle Number Concentration and Particle Size in Airshed of Guangzhou, South China
by: Hing Cho Cheung, et al.
Published: (2022-06-01)

Re “Inhaled Corticosteroid Particle Size and Risk of Hospitalization Rue to Exacerbations and All-Cause Mortality in Patients With Chronic Obstructive Respiratory Disease. A Nationwide Cohort Study”. Heerfordt et al [Letter]
by: Hubbard R, et al.
Published: (2025-02-01)

Assessing the Effect of Different Particle Sizes of Coarse Aggregates on Concrete Properties.
by: Ahabwe, Reinhard
Published: (2024)

Dutasteride nanoemulsion preparation to inhibit 5‐alpha‐hair follicle reductase enzymes in the hair follicle; an ex vivo study
by: Mehri Memar Bashi Aval, et al.
Published: (2023-02-01)

Investigation of mechanical, morphological and thermal properties of waste glass powder and wood flour reinforced polypropylene composite
by: Tanhim Zaman Sheikh, et al.
Published: (2025-01-01)

Development of Novel Fluticasone/Salmeterol/Tiotropium-Loaded Dry Powder Inhaler and Bioequivalence Assessment to Commercial Products in Rats
by: Hyukjun Cho, et al.
Published: (2025-01-01)

A Comparison Study of Chemical Compositions and Sources of PM1.0 and PM2.5 in Hanoi
by: Pham Duy Hien, et al.
Published: (2021-07-01)

Effect of Titania Nano-additives on Fine and Ultrafine Carbonaceous Emissions during Flame Combustion of Diesel
by: Akshat Jain, et al.
Published: (2024-03-01)

Research on Effect of Powder Particle Size on Quality Performance of MIM Small Module Gears
by: Zhong Zhicheng, et al.
Published: (2023-12-01)

Particle size distribution of Japanese cedar chip converted from boards using a disc chipper and its relationships with disc rotation speed and board feed speed
by: Yosuke Matsuda, et al.
Published: (2025-01-01)

A Simple Method for Generating Narrowly-dispersed Bioaerosols in Various Sizes
by: Young-Su Jeong, et al.
Published: (2023-03-01)

The Indoor Concentration and Size Distribution of Airborne Bacteria in a Typical Traditional Market
by: Yi-Tang Chang, et al.
Published: (2023-06-01)

Current Challenges in Visibility Improvement in Sichuan Basin
by: Gang Zhao, et al.
Published: (2022-06-01)

Size Optimization of Cooperative Robots for High Flexibility in Target Space
by: Yuanyuan Li, et al.
Published: (2022-09-01)

Cementation of copper onto brass particles in a packed bed
by: Stanković Velizar D., et al.
Published: (2004-01-01)

Non-Poissonian particle fluctuations in the cosmic ray extensive air shower and shower size estimation
by: Tadeusz Wibig, et al.
Published: (2025-01-01)

Fine Sieving of Atmospheric Particles in a Collected Air Sample Using Oil Electrophoresis
by: Xinyue Li, et al.
Published: (2021-03-01)

Particle-size fractions-dependent extracellular enzyme activity in sediments and implications for resource allocation in a subtropical mangrove ecosystem
by: L. Luo, et al.
Published: (2015-01-01)

Influence of particle size on NIR spectroscopic characterization of sorghum biomass for the biofuel industry
by: Md Wadud Ahmed, et al.
Published: (2025-01-01)

Investigation into the PSD characteristics of internally unstable soils susceptible to suffosion
by: Xingjie Zhang, et al.
Published: (2025-01-01)

Relationship between Particle Size Distribution and Pollutant Content during the Transport of Storm Runoff
by: GAO Aiping, et al.
Published: (2024-12-01)

Influence of the Sedimentation Conditions on the Formation of Reservoir Rocks of the Bobrikovsko-Radaevskian Deposits
by: S.E. Valeeva, et al.
Published: (2015-12-01)

The Comparison of Chosen - Bonded with the Use of Classical and Dedicated for 3D Printing Furfuryl Binder - Molding Sands’ Properties as a Basis for Development a New Inorganic System
by: D.M. Halejcio, et al.
Published: (2024-12-01)

Resummed jet mass distribution with trimming in Z+jet events at the LHC
by: Safa Gaid, et al.
Published: (2024-12-01)

Immunoprotective effect of chitosan nanoparticles with different particle sizes against H9N2 avian influenza infection
by: Shangen Xu, et al.
Published: (2025-01-01)

Effect of Iota-Carrageenan and Its Hydrolysates on the Stability of Milk Ice Cream Mixes
by: Anna Kot, et al.
Published: (2023-06-01)

Metal Powder Production by Atomization of Free-Falling Melt Streams Using Pulsed Gaseous Shock and Detonation Waves
by: Sergey M. Frolov, et al.
Published: (2025-01-01)

Transport and sedimentation of microplastics by turbidity currents: Dependence on suspended sediment concentration and grain size
by: Marianna Soler, et al.
Published: (2025-01-01)

Effects of the physical form of starter feed on the intake, performance, and health of female Holstein calves
by: Í.R.R. Castro, et al.
Published: (2025-02-01)

Effect of Particle Sizes on Thermal Conductivity of Five Wood Species from the Family of Sterculiaceae, Moraceae, and Ulmaceae
by: T. M. Aramide, et al.
Published: (2025-02-01)