-
221
Degradation of Rhodamine B by manganese residue activated peroxymonosulfate
Published 2025-01-01“…The pores in manganese residue were predominantly mesoporous. The removal rate of RhB could reach 97.6% at 120 min under the conditions of temperature of 25 ℃, RhB concentration of 20 mg/L, manganese residue dosage of 2.0 g/L, PMS concentration of 0.50 mmol/L, pH of 4.9, and still could maintain 84.2% after 5 cycles. …”
Get full text
Article -
222
Efficient adsorptive removal of Congo Red dye using activated carbon derived from Spathodea campanulata flowers
Published 2025-01-01“…SCAC was synthesized using orthophosphoric acid activation which yielded a mesoporous material with a specific surface area of (986.41 m2/g), significantly exceeding values reported for flower-derived activated carbons in the available literature. …”
Get full text
Article -
223
Sensitive Detection of Biomarker in Gingival Crevicular Fluid Based on Enhanced Electrochemiluminescence by Nanochannel-Confined Co<sub>3</sub>O<sub>4</sub> Nanocatalyst
Published 2025-01-01“…This study developed an immunosensor by engineering an immunorecognition interface on the outer surface of mesoporous silica nanochannel film (SNF) and confining a Co<sub>3</sub>O<sub>4</sub> nanocatalyst within the SNF nanochannels to improve the luminol ECL efficiency. …”
Get full text
Article -
224
Enhanced CO2 Capture Performance Using Methyl Diethanolamine-functionalized Silica Gels: Assessing CO2 Capture Capacity
Published 2025-01-01“…There are many potential solid adsorbents for CO2 capture, such as zeolites, alumina, metal‒organic frameworks (MOFs), and mesoporous silicas. Silica materials possess unique properties that make them promising candidates as solid sorbents for CO2 capture. …”
Get full text
Article -
225
Significant Removal of Harmful Compounds in Mainstream Cigarette Smoke Using Carbon Nanotubes Mixture Prepared by Catalytic Pyrolysis
Published 2014-06-01“…The textural structure of CNTM has mesoporous and macroporous nanostructures. After introducing 15 mg of CNTM into cigarette filter, some of the most important harmful compounds including tar, nicotine, benzo[a]pyrene (B[a]P) and phenolic compounds were more efficiently adsorbed in comparison with using commercial activated carbon, which can be related to the relatively bigger pore volume and a geometric confinement of CNT in CNTM for some toxic compounds in cigarette smoke. …”
Get full text
Article -
226
Effect of the Mg/Al Ratio on Activated Sol-Gel Hydrotalcites for Photocatalytic Degradation of 2,4,6-Trichlorophenol
Published 2017-01-01“…The catalysts are of mesoporous materials and exhibiting large surface areas. …”
Get full text
Article -
227
Adsorption of Volatile Carboxylic Acids on Activated Carbon Synthesized from Watermelon Shells
Published 2014-03-01“…Finally, the physical and chemical characteristics of the synthesized AC were studied, which gave the following results: The surface area was 710 m 2 /g for CAS and 864 m 2 /g for CASM, a microporous and mesoporous structure, pore-size distribution of 0.39–4.54 nm for CAS and 0.39–6.0 nm for CASM, pore volume of 0.26 cm 3 /g for CAS and 0.55 cm 3 /g for CASM. …”
Get full text
Article -
228
FeO–alumina catalyst for reforming waste polyethylene terephthalate (PET) pyrolyzed products: synthesis, characterization, and performance evaluation
Published 2024-11-01“…In this study, a new type of catalyst was synthesized by incorporating mesoporous FeO onto aluminium oxide trihydrate (alumina) and applied in reforming polyethylene terephthalate (PET) pyrolyzed gas into valuable fuels. …”
Get full text
Article -
229
Emerging contaminant removal using eco-friendly zinc ferrite nanoparticles: Sunlight-driven degradation of tetracycline
Published 2025-06-01“…Emerging contaminants, particularly pharmaceutical pollutants, pose significant environmental challenges, necessitating sustainable remediation strategies. In this study, mesoporous zinc ferrite nanoparticles (ZnFe2O4) were synthesized via a green hydrothermal method using sweet cherry leaf extract for the photocatalytic degradation of tetracycline (TC) under natural sunlight. …”
Get full text
Article -
230
Antibiofilm and Anticancer Activity of Multi-Walled Carbon Nanotubes Fabricated with Hot-Melt Extruded Astaxanthin-Mediated Synthesized Silver Nanoparticles
Published 2025-01-01“…In this process, MWCNTs were coated with mesoporous silica (MWCNT-Silica) for uniform and regular loading of AgNPs on the MWCNTs. …”
Get full text
Article -
231
P(AN-co-MMA) nanofiber membrane decorated with greenly synthesized nanoparticles for heavy metal removal: a competitive study
Published 2025-01-01“…The CoFe _2 O _4 nanoparticles exhibited type-IV isotherm, indicating the formation of mesoporous/macroporous materials with a specific surface area of 36.8 m ^2 g ^−1 . …”
Get full text
Article -
232
Efficient organic pollutant mineralization via PMS-sonophotocatalysis with doped-ZnO-CNT aerogels
Published 2025-02-01“…X-ray diffraction (XRD) revealed that the hexagonal wurtzite structure of ZnO remained throughout all the samples, and Brunauer–Emmett–Teller (BET) analysis showed that their mesoporous nature and surface areas were enlarged. Photoluminescence (PL) spectra and Fourier-transform infrared (FTIR) spectroscopy displayed how dopants changed the defect density and optical properties of ZnO. …”
Get full text
Article -
233
Adsorptive removal of toxic heavy metal and dyes from wastewater by rice husk (lignocellulosic biomass) derived activated biochar: A fixed-bed column adsorption study
Published 2025-03-01“…As per the findings it has been stated that the synthesized FRHBC adsorbents have possessed a promizing 2D honeycomb-like well-oriented mesoporous surface microstructure with a larger surface area around 36.84 m2/g. …”
Get full text
Article -
234
Effects of ZnO nanoparticles concentration on the morphology and textural properties of ZnO/NiFe2O4 nanocomposite
Published 2025-06-01“…Brunauer-Emmett-Teller (BET) plot shows that ZnO belongs to the type II isotherm curve while NiFe2O4 and 3, 5 and 7 % ZnO/NiFe2O4 all belong to type IV isotherm curve indicating ZnO as macroporous while NiFe2O4 and different dopant concentration of ZnO/NiFe2O4 are mesoporous. The study shows the complete synthesis of ternary ZnO/NiFe2O4 nanocomposites using green synthesis and sol-gel approach. • Green synthesis of ZnO and NiFe2O4 using leaf extract of Anacardium occidentale • Co-precipitation method at different concentration of ZnO and NiFe2O4 for the synthesis of ZnO/NiFe2O4. • Nanocomposites was characterized using different analytical tools…”
Get full text
Article -
235
-
236
Resensitizing β‐Lactams by Reprogramming Purine Metabolism in Small Colony Variant for Osteomyelitis Treatment
Published 2025-02-01“…Therefore, a co‐delivery system for lonidamine and oxacillin is constructed with amino‐modified dendritic mesoporous silica as a carrier, which showed high efficacy and safety in combating SCV both in vitro and in vivo experiments. …”
Get full text
Article -
237
Effect of a bimetal Mn/Zn catalyst supported on activated carbon for selective oxidation of ethyl lactate to ethyl pyruvate
Published 2025-04-01“…A novel heterogeneous catalyst, AC/Mn/Zn (manganese and zinc supported on mesoporous activated carbon), was synthesized using a cost-effective and efficient approach that prioritizes affordability and accessibility. …”
Get full text
Article -
238
Conjugated Polyvinyl Alcohol Modified SnO2 for Efficient Visible Light Photocatalytic Reduction of Cr(VI)
Published 2024-12-01“…A series of testing and characterization results revealed that CPVA was uniformly coated on the surface of SnO2, forming a mesoporous CPVA/SnO2 heterojunction with enhanced crystallinity and reduced oxygen defects, which resulted in an expanded light absorption range towards the red light region. …”
Get full text
Article -
239
3D-Printed PCL-Based Scaffolds with High Nanosized Synthetic Smectic Clay Content: Fabrication, Mechanical Properties, and Biological Evaluation for Bone Tissue Engineering
Published 2025-01-01“…André SA Furtado,1,* Manuel HS Cunha,1,* Luciana MR Sousa,1 Guilherme C Brito,1 Thiago FCL Verde,1 Livia Alves Filgueiras,2 Leonardo A Sobral-Silva,3 Moisés V Santana,1 Gustavo F Sousa,1 Francisco EP Santos,4 Anderson N Mendes,2 José Figueredo-Silva,5 Antônio LM Maia Filho,5 Fernanda R Marciano,1,4 Luana MR Vasconcellos,3 Anderson O Lobo1 1Interdisciplinary Laboratory for Advanced Materials (LIMAV), Materials Science and Engineering Graduate Program (PPGCM), Federal University of Piauí (UFPI), Teresina, PI, Brazil; 2Laboratory of Innovation in Science and Technology, Department of Biophysics and Physiology, Federal University of Piauí, Teresina, PI, Brazil; 3Institute of Science and Technology, São Paulo State University (UNESP), São Paulo, SP, Brazil; 4Department of Physics, Federal University of Piauí (UFPI), Teresina, PI, Brazil; 5Biotechnology Research Center - State University of Piauí, Teresina, PI, Brazil*These authors contributed equally to this workCorrespondence: Anderson O Lobo, Interdisciplinary Laboratory for Advanced Materials, UFPI - Federal University of Piaui, Teresina, Brazil, Email lobo@ufpi.edu.brBackground: The 3D printing of macro- and mesoporous biomimetic grafts composed of polycaprolactone (PCL) infused with nanosized synthetic smectic clay is a promising innovation in biomaterials for bone tissue engineering (BTE). …”
Get full text
Article -
240
Synergistic thermal and surface area properties of Al2O3–TiO2/water hybrid nanofluids
Published 2025-06-01“…The structural analysis of TiO2 and Al2O3 nanoparticles reveals a mesoporous structure with curve isotherm type IV that has loop hysteresis characteristics. …”
Get full text
Article