-
1301
Low Temperature Synthesis of Hexagonal Bi2Te3 Nanoplates Using an Open Reactor and Its Effect on Their Physicochemical Properties
Published 2024-01-01“…The samples were drop-cast on glass and FTO substrates for subsequent structural, chemical, and thermoelectric analyses. The electron microscopy analysis demonstrated that samples precipitated in highly crystalline hexagonal nanoplates, grown along the [0 1 5] plane of the rhombohedral phase of Bi2Te3. …”
Get full text
Article -
1302
Extraction and characterization of spherical nanocellulose from sesame husks
Published 2025-01-01“…Atomic force microscopy (AFM) and field-emission scanning electron microscopy (FE-SEM) analyses showed that SHNC particles were spherical to oval-shaped, with average diameters of 78.41 nm and 74.30 nm, respectively. …”
Get full text
Article -
1303
Investigation of the Performance of Aucore-Pdshell/C as the Anode Catalyst of Direct Borohydride-Hydrogen Peroxide Fuel Cell
Published 2011-01-01“…The core-shell structure, surface morphology, and electrochemical performances of the catalysts are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ultraviolet-visible absorption spectrometry, linear sweep voltammetry, and chronopotentiometry. …”
Get full text
Article -
1304
Lignin-Carbohydrate Complexes Based Spherical Biocarriers: Preparation, Characterization, and Biocompatibility
Published 2017-01-01“…It was observed using a scanning electron microscopy (SEM) that liver cells adhered to the spherical biocarriers during culture. …”
Get full text
Article -
1305
Development of a Stable TiO2 Nanocomposite Self-Cleaning Coating for Outdoor Applications
Published 2016-01-01“…Superhydrophobic behavior is analyzed by contact angle measurements, scanning electron microscopy (SEM), and profilometer. The stability of the developed coating also has been evaluated in terms of immersion in various aqueous solutions, heating, adhesion, and exposure to UV irradiation, and the results showed good stability against these factors. …”
Get full text
Article -
1306
Experimental Study on the Effects of Stress-Induced Damage on the Microstructure and Mechanical Properties of Soft Rock
Published 2021-01-01“…In this study, a sandstone was first artificially predamaged and then subsequently subjected to scanning electron microscopy (SEM) analysis, computed tomography (CT) scanning, and uniaxial compression testing. …”
Get full text
Article -
1307
Synthesis of CdS Sensitized TiO2 Photocatalysts: Methylene Blue Adsorption and Enhanced Photocatalytic Activities
Published 2016-01-01“…The as-produced powders were characterized by XRD, electron microscopy, EDX, and UV-Vis diffuse reflectance spectroscopy. …”
Get full text
Article -
1308
On the use of clustering workflows for automated microstructure segmentation of analytical STEM datasets
Published 2025-01-01“…This study considers the issue of automated segmentation of scanning transmission electron microscopy (STEM) datasets using unsupervised machine learning approaches. …”
Get full text
Article -
1309
Synthesis ZnO/RGO nanocomposite: Structural characteristics and antifungal/antibacterial properties
Published 2024-02-01“…Various characterization techniques such as Fourier transform infrared spectroscopy, field emission scanning electron microscopy and X-ray diffraction, were employed to investigate the phase composition, microstructure form, and degree of crystallinity. …”
Get full text
Article -
1310
Impact of micromechanical properties of organic matter on the micro-mesopore structures of the over-mature shale in the Niutitang Formation
Published 2025-02-01“…In this study, shale cores from the Niutitang Formation have been specifically chosen for OM isolation, adsorption testing, atomic force microscopy examination, and focused ion beam scanning electron microscopy (FIB-SEM) analysis to assess the micromechanical properties of OM and pore structures. …”
Get full text
Article -
1311
Structure of ADI Cast Iron as a Cast “in situ” Composite Reinforced with TiC Ceramic Particles
Published 2024-12-01“…In this study, metallographic analysis of the composite obtained, both in the initial state and after heat treatment, was carried out using optical and scanning electron microscopy. An analysis of the chemical composition in the micro-area was carried out using the EDS method, the chemical composition was studied using the XRF spark X-ray fluorescence method, and the proportion of graphite and the carbide phase, i.e. titanium carbide TiC, was determined. …”
Get full text
Article -
1312
Characterization of Nanocrystalline SiGe Thin Film Solar Cell with Double Graded-Dead Absorption Layer
Published 2012-01-01“…The characterization of the nc-SiGe films are analyzed by scanning electron microscopy, UV-visible spectroscopy, and Fourier transform infrared absorption spectroscopy. …”
Get full text
Article -
1313
Adsorptive removal of phosphate and nitrate by layered double hydroxides through the memory effect and in situ synthesis
Published 2025-02-01“…The synthesized LDHs were thoroughly characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET) surface area analysis, and X-ray diffraction (XRD). …”
Get full text
Article -
1314
Freeze-Drying Microencapsulation of <i>Ruellia tuberosa</i> L. Extracts: A Comparative Study Using Different Polymers as Encapsulants
Published 2025-01-01“…Characterization techniques included scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, and particle size analysis (PSA). …”
Get full text
Article -
1315
Phase Relations in Ba6−3xLn8+2xTi18O54 (Ln = Nd & Sm) Electroceramics
Published 2013-01-01“…The microwave dielectric properties of the materials are reported in addition to phase characterisation and structural analysis via X-ray diffraction and field emission scanning electron microscopy coupled with energy dispersive X-ray spectroscopy. …”
Get full text
Article -
1316
SiO2-TiO2 Films Supported on Ignimbrite by Spray Coating for the Photocatalytic Degradation of NOx Gas and Methyl Orange Dye
Published 2020-01-01“…The morphology and chemical composition of the synthesized samples were characterized by field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectrometer (EDS), which reveal the successful SiO2-TiO2 coating on ignimbrite. …”
Get full text
Article -
1317
Wetting behaviour and reactivity between liquid Gd and ZrO2 substrate
Published 2017-01-01“…The solidified Gd/3YSZ couple was studied by means of optical microscopy and scanning electron microscopy coupled with X-ray energy dispersive spectroscopy. …”
Get full text
Article -
1318
Removal of boron from wastewaters using valonia-tannin-based biosorbent produced via spray drying
Published 2024-08-01“…Comprehensive characterization studies involving Fourier transform infrared, X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller analysis were conducted on this biosorbent. …”
Get full text
Article -
1319
Isolated Effect and Sensitivity of Agricultural and Industrial Waste Ca-Based Stabilizer Materials (CSMs) in Evaluating Swell Shrink Nature of Palygorskite-Rich Clays
Published 2021-01-01“…The investigation includes X-Ray Diffraction (XRD) Analysis, Scanning Electron Microscopy (SEM), X-Ray Fluorescence (XRF) tests, and physicomechanical properties such as moisture-density relationship, Atterberg’s limits, swell pressure, and an ANN-based sensitivity analyses of overall swell pressure development. …”
Get full text
Article -
1320
Study on diffusion bonding of composite metal foams
Published 2025-06-01“…This study evaluates the suitability of diffusion bonding in joining CMF panels through a combination of uniaxial tensile tests and scanning electron microscopy (SEM) observations. Tensile testing indicated bond strength to be largely affected by sample density, and in turn, consistency of the steel powder used in CMF production. …”
Get full text
Article