RESEARCH ON NUMERICAL SIMULATION OF STRESS DISTRIBUTION OF ANTI-TWIST BRAIDED WIRE ROPE by FU Chao, WANG Hui, CUI WeiHua, XU HongQin, ZHAO Xia

“…An geometric entity model of the anti-twist braided wire rope was established using the three-dimension software. The finite element model of the anti-twist braided wire rope can be acquired by appropriate meshing operation. …”
Get full text

Inverse Approach to Evaluate the Tubular Material Parameters Using the Bulging Test by Yulong Ge, Xiaoxing Li, Lihui Lang

“…Tubular material parameters are required for both part manufactory process planning and finite element simulations. The bulging test is one of the most credible ways to detect the property parameters for tubular material. …”
Get full text

Constrained Modal Analysis and Structure Improvement of Drive Gearbox of High-speed EMU by Wei Hao, Honghai Xu

“…Taking the drive gearbox of a high-speed EMU as the research object，uses APDL language to establish the constrained modal analysis parametric model of the gearbox，uses the spring element to simulate the joint surface between the shaft and the box，and the first four mode shape and the natural frequency of gearboxes are obtained through finite element analysis. By using the Sobol local sensitivity analysis method，the key structural parameters that affect the natural frequency of the gearbox is determined，the influence of key structural parameters on the natural frequency is analyzed. …”
Get full text

Climbing Pinion Design for the Jacking System of a Self-elevating Platform by Ning Ren, Feng Zhou

“…It is pointed out that the finite element method can be used as an effective method for checking the strength of large module gears.…”
Get full text

Effect of cracking and randomness of inputs on corrosion initiation of reinforced concrete bridge decks exposed to chlorides by P. Konecny, P. Lehner

“…The preliminary model for damage effect on chloride ion ingress through water proof membrane under penetrable asphalt overlay is used. 2-D finite element chloride ingress model is combined with Monte Carlo simulation technique. …”
Get full text

Development and experimental validation of conceptual models for solenoid-based in-vessel two-channel control rod position indicator by Soonwoo Han, Jae-Seon Lee

“…First, the principle of measuring the position of a ferromagnetic rod by using a solenoid was formulated, and the change in solenoid inductance with the rod position was calculated through finite element analysis. Based on the proposed models, test products were manufactured and tested on three items to confirm the feasibility of the proposed solenoid-based two-channel control rod position indicator.…”
Get full text

Study on Modal Characteristic of Whole FA Reducer based on HM-ANSYS Co-simulating by Lei Lei, Jing Xiao, Tianmin Guan, Liang Xuan

“…By importing Hypermesh for detailed mesh generation, contact definition and constraint addition, the finite element model is established, and then importing ANSYS for modal analysis under constraint conditions. …”
Get full text

ANALYSIS OF OSCILLATING ROD OF HORIZONTAL LOGARITHM PERIOD ANTENNA UNDER WRAP ICE by SONG ZongFeng, WANG ZuoXiang, GUO Wei

“…Analysis of oscillating rod of rigid structure horizontal log-periodic antenna under wrap ice was performed,due to winter weather oscillating rod is bent,somewhere in the north in February 2014.In the finite element software ANSYS platform,to wrap the ice thickness,wrap ice when wind speed is known conditions,a detailed analysis of wrapped ice of bending oscillating rod was performed.The results show that the actual thickness beyond the design wrapped ice thickness.So cause the wrap ice load and wind load area increases,beyond the oscillating rod and its cable carrying capacity,resulting in instability of the oscillating rod bent.According to the oscillating rod bent reason,in order to meet the requirements of heavy ice wrapped,the improved design of the oscillating rod was proposed.…”
Get full text

Fracture analysis of AA6061-graphite composite for the application of helicopter rotor blade by Saleemsab Doddamani, Chao Wang, M.JinnahSheik Mohamed, Md. Arefin Kowser

“…The main objective of the work is to study the fracture behavior of AA6061-graphite material using both experimental technique and finite element simulation by considering helicopter rotor blade as a case study. …”
Get full text

Giant Magnetostrictive Drive Deflection Amplifier by Zhang Chong, Zhou Chungui, Fan Junjian

“…The existence of the linear relation is verified by the simulation of the finite element software,compared with the calculated results,it is concluded that the existence of internal reaction force causes additional displacement loss. …”
Get full text

The Effects of Crack on the Transmission Matrix of Rotor Systems by Z.K. Peng, Z.Q. Lang, G. Meng, F.L. Chu

“…In the present study, the infl uence of crack on the transmission matrices of the rotor systems is investigated by using the FEM (finite element method) analysis and the HBM (harmonic balance method) technique. …”
Get full text

SIMULATION ANALYSIS OF CARGO LOADING ON CRASHWORTHINESS OF COMPOSITE FUSELAGE SECTION by XIE Jiang, MOU HaoLei, ZOU TianChun, FENG ZhenYu, MAO KeYi

“…For the demand of crashworthiness verification and certification of composite aircraft structures,a finite element model of fuselage section with waved-plates under cargo floor was suggested,and rigid simplified model of cargo was also developed. …”
Get full text

Research on Meshing Force of Harmonic Reducer based on No-load Backlash and Circumferential Meshing Stiffness by Ziying Wang, Qungui Du, Dongzhou Zheng, Yuhang Hu, Mengfei Liu, Longfeng Zhong

“…The distribution of meshing force under different load conditions is obtained by iterative solution based on the no-load backlash and the circumferential meshing stiffness matrix. A finite element model is established to verify the accuracy of the analytical model，and the results are basically consistent.…”
Get full text

Micromorphology and damage characterization of vacuum brazed stainless steel joints with laser etched interfaces by Jie Wang, Huixin Chen, Yichuan Wang, Nian Li, Xinlong Wei, Xiang Ling

“…With the increase of laser etching times, the shear strength of brazed joints shows a gradual decline trend. The finite element results indicate that the microstructure formed by laser etching promotes the generation of thermal residual compressive stress and reduces residual tensile stress.…”
Get full text

Evaluation of an Improved Technique for Geosynthetic-Reinforced and Pile-Supported Embankment by Jun Zhang, Shao-wen Liu, He-fu Pu

“…To investigate the performance of the FGT embankment, the comparison analyses and parametric studies are conducted by Finite Element Method (FEM). The influencing factors investigated include elastic modulus of soil, tensile stiffness of geosynthetics, pile length, pile spacing, and pile elastic modulus. …”
Get full text

Analysis of Naturally Occurring Radioactive Material (NORM) in shifting earth layers in Piyungan, Bantul by Iqbal Nurrahim, Andang Widi Harto, Yohannes Sardjono, Isman Mulyadi Triatmoko, Zuhdi Ismail, Gede Sutresna Wijaya

“…We developed a radon well geometry for Piyungan using Finite Element Method principles, and conducted simulations via GNU Octave to assess normal and anomalous conditions. …”
Get full text

The Influence of the Track Parameters on Vibration Characteristics of Subway Tunnel by Wenbo Shi, Linchang Miao, Junhui Luo, Honglei Zhang

“…A nonlinear coupling model of wheel-track and a finite element calculation model of tunnel and soil were established based on the mechanical character of elastic supporting block ballastless track and the actual parameters of Nanjing soft soil. …”
Get full text

A Generalized Multiconductor Transmission Line Model and Optimized Method for the Solution of the MTL Equations by Chaoqun Jiao, Zhanjun Xia, W. N. Fu

“…Then, the optimized solution based on Time domain finite element method (TDFEM) is developed for the above MTL equations. …”
Get full text

Development of axisymmetric shell model for creep deformation analysis of reactor pressure vessel lower head by Jang Min Park, Kukhee Lim

“…The analysis results using the developed model are compared with those of finite element analysis, considering deformation history, stress distribution, and deformed shape. …”
Get full text

Solving Scattering from Conducting Body Coated by Thin-Layer Material by Hybrid Shell Vector Element with Boundary Integral Method by Lin Lei, Jun Hu, Hao-Quan Hu

“…The finite element boundary integral (FEM-BI) method is widely used in the scattering and radiating problems. …”
Get full text