Microseismicity-Based Modelling of Induced Fracture Networks in Unconventional Reservoirs
A single planar hydraulic fracture is typically the primary component used to simulate hydraulic fracturing stimulation in conventional reservoirs. However, in ultra-low-permeability shale reservoirs, a large system of fracture networks must be generated to produce hydrocarbons economically. Therefo...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2024-11-01
|
| Series: | Fuels |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2673-3994/5/4/47 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | A single planar hydraulic fracture is typically the primary component used to simulate hydraulic fracturing stimulation in conventional reservoirs. However, in ultra-low-permeability shale reservoirs, a large system of fracture networks must be generated to produce hydrocarbons economically. Therefore, traditional modeling approaches centered on single planar fractures are inadequate for accurately representing the intricate geometry and behavior of fractures in these reservoirs. In previous works, 2D fractal fracture networks (FFNs) have been used to generate sets of hydraulic and natural fractures based on microseismic event (MSE) data. Since microseismic data are retrieved in 3D space, the aforementioned model cannot accurately represent induced fracture properties. The objective of this paper is to study in detail the recently developed 2D FFN model and propose a novel solution by expanding the previous model to accommodate real 3D microseismic data. First, the definitions of the 2D FFN model are described, and associated calibration mechanisms are proposed. Next, the 3D FFN model and its calibration system are demonstrated. While the novel 3D calibration solution utilizes an identical matching concept to the 2D methodology, the residual distances between the nodes and the MSE are calculated in 3D spaces. Finally, a set of real microseismic data are used to calibrate the generation of 3D fractals using the proposed workflow. The interactions between microseismicity and fractured reservoir dynamics are represented through the integration of fractal fracture models and microseismic data. This work contributes to advancing the current understanding of hydraulic fracturing in unconventional reservoirs and provides a valuable framework for improving fracture modeling’s accuracy in reservoir engineering applications. |
|---|---|
| ISSN: | 2673-3994 |