FORMING OF TUBE SLUGS OF TIN BRONZE BY METHOD OF DIRECTIONAL HARDENING FROM MANDREL TO PERIPHERY

FORMING OF TUBE SLUGS OF TIN BRONZE BY METHOD OF DIRECTIONAL HARDENING FROM MANDREL TO PERIPHERY

Peculiarities of pipe billets by means of directional solidification from mandrel to periphery are described.

Saved in:

Bibliographic Details
Main Authors:	Ju. L. Stanulenis, A. P. Popelushko, V. A. Harjkov
Format:	Article
Language:	English
Published:	Belarusian National Technical University 2009-08-01
Series:	Литьë и металлургия
Online Access:	https://lim.bntu.by/jour/article/view/1109
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Copper tin bronzes in Mesoamérica
by: Dorothy Hosler
Published: (2011-02-01)

INVESTIGATION OF CONSTRUCTIONAL CHARACTERISTICS OF CUTS ON MANDREL AT PRODUCTION OF HOLLOW SLUGS OF NON-FERROUS ALLOYS
by: O. N. Horoshilov, et al.
Published: (2006-05-01)

CALCULATION OF DEFORMATION FORCE AT PLASTIC FORMING OF FLANGE IN THE TUBE SLUG
by: L. A. Isaevich, et al.
Published: (2007-02-01)

MECHANICAL CHARACTERISTICS OF INDUSTRIAL TYPES OF STEEL AT HARDENING OF INGOTS AND SLUGS
by: V. I. Timoshpolskij, et al.
Published: (2005-08-01)

Influence of hydrogen on formation of primary structures of tin and aluminium bronze
by: E. I. Marukovich, et al.
Published: (2023-09-01)

PROCESSES OF MASS-TRANSFER IN DENDRITE GRIT AT HARDENING OF STEEL INGOTS AND SLUGS
by: Ju. A. Samoilovich, et al.
Published: (2006-02-01)

USE OF CHEMICAL SYNTHESIS OF NANODISPERSE MODIFIERS AT INDUCTION HEATING OF FURNACE CHARGE ON THE BASIS OF POWDERS TIN BRONZE FOR HARDENING AND INCREASE OF TRIBOTECHNICAL PROPERTIES OF THE FUSE-ON COVERINGS
by: I. A. Sosnovsky, et al.
Published: (2016-12-01)

Research on the effect of the grooving of mill rolls of the reeling tube mill on the wear of the elongating mandrel
by: Yu. L. Bobarikin, et al.
Published: (2019-01-01)

THE PRODUCTION ORGANIZATION OF THE SAND SLUGS OF COLD-HARDENING MIXTURES AT ОАО “AZOVMASH”
by: A. P. Melnikov, et al.
Published: (2005-05-01)

PECULIARITIES OF PRODUCTION OF SHEET METAL-ROLL of Cu-Ni-Cr-Si bronze
by: E. I. Marukovich, et al.
Published: (2006-05-01)

THEORETICAL ANALYSIS OF PROCESS OF THE THIN-WALLED SLUG HARDENING IN SAND M ODE
by: A. N. Krutilin, et al.
Published: (2006-05-01)

TECHNOLOGY OF RESTORATION OF ROLLED MANDREL OF CONTINUOUS MILL PQF IN TUBE-SHOP OF OAO «BMZ» – MANAGEMENT COMPANY OF HOLDING «BMK»
by: A. G. Shcheglov
Published: (2013-05-01)

Effect of Heat Input on Tin Bronze-Induced Intergranular Cracks During Arc Cladding Process
by: Chen Chen, et al.
Published: (2024-10-01)

The idea of “soft” squeezing as a method of control of shrink and liquidation processes at hardening of uninterruptedly cast slugs
by: V. A. Matochkin, et al.
Published: (2003-02-01)

REFINEMENT OF CASTINGS AT CASTING BY DIRECTIONAL HARDENING
by: E. I. Marukovich, et al.
Published: (2005-05-01)

THE EFFECT OF IRRADIATION OF THE LIQUID PHASE WITH NANOSECOND ELECTROMAGNETIC PULSES ON CRYSTALLIZATION AND STRUCTURE FORMATION, PROPERTIES OF COPPER AND TIN BRONZE
by: E. H. Ri, et al.
Published: (2012-09-01)

ANALYSIS OF HEATING PECULIARITIES OF FORMING OF UNINTERRUPTEDLY-CASTED WIRE SLUGS
by: E. I. Marukovich, et al.
Published: (2008-05-01)

CHOICE OF OPTIMA! PARAMETERS OF TECHNOLOGY OF THE TUBE SLUGS IN CIRCULAR FURNACE
by: V. I. Timoshpoiski, et al.
Published: (2007-11-01)

SPECIALIZING OF THE HEAT TRANSFER COEFFICIENTS FOR SOLUTION OF THE PROBLEM OF THE CYLINDRICAL UNINTERRUPTEDLY-CASTED SLUGS SOLIDIFICATION WITH USING OF EXPERIMENTAL TEMPERATURE DATA OF CRYSTALLIZER IN STEADY CASTING REGIME
by: A. M. Branovitski, et al.
Published: (2005-02-01)

Technical and economic advantages of using elongating mandrel made of forged blank when rolling on a continuous mill with a controlled‑movable mandrel
by: A. I. Tovsteleva
Published: (2021-12-01)

INFLUENCE OF HYDROGEN ON FORMING OF ALLOYS STRUCTURE AT CASTINGS HARDENING
by: V. Ju. Stetsenko
Published: (2010-05-01)

COMPLEX INVESTIGATIONS OF THE PROCESSES OF FORMING OF THE UNINTERRUPTEDLYCASTED STEEL SLUGS WITH THE PURPOSE OF REFINEMENT
by: V. I. Timoshpolski, et al.
Published: (2004-02-01)

Repair of mandrels of a continuous mill through the use of adapters
by: E. V. Zhuravleva, et al.
Published: (2024-09-01)

INCREASING OF STEADINESS OF THE CRYSTALLIZER COOLING AT CASTING OF DIRECTIONAL HARDENING
by: E. I. Marukovich, et al.
Published: (2005-05-01)

Fatigue Enhancement Mechanism and Process Optimization of the Direct Mandrel Cold Expansion Technique on Lightweight and High-Strength Alloys
by: Hansong Ji, et al.
Published: (2025-03-01)

The development of the Institute in the field of technology and equipment for production of slugs from sand-resin mixtures, hardened by the gaseous catalyzers blowout
by: D. A. Kudin, et al.
Published: (2002-11-01)

OPTIMIZATION OF CONSTRUCTIONS OF PIERCING MANDRELS, USED IN PIPE ROLLING IN CONDITIONS OF RUP «BMZ»
by: A. G. ozhevnikov, et al.
Published: (2009-05-01)

Numerical Investigation and Performance Evaluation of Boiling Slug Flow Regime of Water Vapor in Vertical Tubes
by: F. Sharifi, et al.
Published: (2025-08-01)

THE TECHNOLOGICAL PECULIARITIES OF CENTRIFUGAL PRODUCTION AND STRUCTURE OF TUBE SLUGS OF CLOSING RINGS FOR GEAR-BOX OF TRACTOR K700
by: D. A. Volkov, et al.
Published: (2005-02-01)

HARDENING OF CASTINGS AT FREE FORMING OF INTERNAL SURFACE
by: E. I. Marukovich, et al.
Published: (2005-08-01)

ON PERSPECTIVES OF APPLICATION OF ACOUSTIC INFLUENCES IN METALLURGIC PROCESSES
by: E. I. Marukovich, et al.
Published: (2009-03-01)

DETERMINATION OF THE OPTIMAL SPEED OF THE MANDREL IN THE CONTINUOUS REELING MILL USING NUMERICAL SIMULATION
by: Yu. L. Bobarikin, et al.
Published: (2017-03-01)

Initial Stages of Electrocrystallization of Coatings with Tin and Tin-Copper and Tin-Copper-Ultradisperse Diamond Alloys
by: I. I. Kuzmar, et al.
Published: (2024-10-01)

GaAs PHEMT PERFORMANCE INCREASE USING DELTA-DOPING IN THE FORM OF NANOWIRES OF TIN ATOMS
by: A. E. Yachmenev, et al.
Published: (2017-04-01)

FORMING OF HOLLOW SLUGS OF CAST IRON WITH GLOBULAR GRAPHITE IN CONDITIONS OF WALL CRYSTALLIZATIO
by: V. F. Bevza, et al.
Published: (2009-08-01)

FORMING OF MECHANICAL CHARACTERISTICS OF THE SLUGS OF TITANIC ALLOY BT23 AT THERMAL TREATMENT
by: V. N. Fedulov
Published: (2005-02-01)

Advanced tin recycling technology
by: B. M. Nemenenok, et al.
Published: (2024-09-01)

Experimental and numerical study of forming aluminum stepped tubes by electromagnetic forming method
by: Javad Esmaeili, et al.
Published: (2025-07-01)

Sergio Waisman. Borges and Translation: The Irreverence of the Periphery
by: Domingo A. García
Published: (2008-11-01)

PRINCIPALLY NEW EFFECTIVE CASTING PROCESS OF THE HOLLOW CYLINDRICAL SLUGS OF CAST IRON BY METHOD OF DIRECTIONAL SOLIDIFICATION
by: E. I. Marukovich, et al.
Published: (2010-08-01)