Governing of Melt Pool Solidification Parameters and Microstructure Evolution Indicator During SLM‐Ti6Al4V Alloy Through Parametric Sweep Optimization

Governing of Melt Pool Solidification Parameters and Microstructure Evolution Indicator During SLM‐Ti6Al4V Alloy Through Parametric Sweep Optimization

ABSTRACT Selective laser melting (SLM) process offers a versatile additive manufacturing technology. However, the wide range of process parameters and complex thermophysical phenomenon necessitate optimization of process parameters for obtaining a high‐quality finished product. The optimization of p...

Full description

Saved in:

Bibliographic Details
Main Authors:	Kidu Gebrecherkos Weldeanenia, Samuel Kinde Kassegne, Perumalla Janaki Ramulu
Format:	Article
Language:	English
Published:	Wiley 2025-01-01
Series:	Engineering Reports
Subjects:	fluctuation reduction microstructure evolution indicator optimum process parameters parametric sweep optimization SLM‐Ti6Al4V alloy simulation solidification parameters
Online Access:	https://doi.org/10.1002/eng2.13040
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Study on the microstructures of SLM IN718 based on solidification model
by: XU Wei, et al.
Published: (2024-12-01)

Numerical study of sweep angle effects of the control fin in supercavitating flow
by: Van-Duyen Pham, et al.
Published: (2025-12-01)

Impact of Laser Power on Electrochemical Performance of CeO<sub>2</sub>/Al6061 Alloy Through Selective Laser Melting (SLM)
by: Fengyong Sun, et al.
Published: (2025-01-01)

Modified SLM algorithm based on cyclic shift and signal combination in MIMO-OFDM system
by: Wu-jun HU, et al.
Published: (2015-04-01)

Design and Application Research of an Adaptive Obstacle Climbing Mechanism for Floor Sweeping Robot
by: Feng Shupeng, et al.
Published: (2018-01-01)

PAPR optimization based on SLM and PTS algorithms in NC-OFDM systems
by: Jie ZHOU, et al.
Published: (2022-07-01)

The effects of ultrasonic solidification on aluminum
by: Đorđević Slavko 1
Published: (2003-01-01)

Research of the Fast Modeling for Spiral Bevel Gear with Spherical Involute based on the SWEEP
by: Li Tongzhong, et al.
Published: (2015-01-01)

Research of the Characteristic of the Working Mode of Hydraulic Machinery Compound Transmission Sweeping Vehicle
by: Fuyi Cao, et al.
Published: (2019-02-01)

Bayesian Q learning method with Dyna architecture and prioritized sweeping
by: Jun YU, et al.
Published: (2013-11-01)

Heat transfer in the mold during vertical continuous casting of steel
by: E. I. Marukovich, et al.
Published: (2018-10-01)

5G millimeter wave cell search algorithm with beam sweeping
by: Min SHEN, et al.
Published: (2020-06-01)

Development of an information measuring and control system for a quadrocopter
by: V. V. Sleptsov, et al.
Published: (2021-12-01)

Analysis and Parameter Optimum of a New 4-DOF 4PPaRR Parallel Mechanism
by: Huiping Li, et al.
Published: (2019-07-01)

Quantitative influence of solidification path on solute micro-segregation and inclusion precipitation in the solidification process of rail steel
by: Xinliang Gao, et al.
Published: (2025-01-01)

The effects of linear energy density and gas environment on droplet spatter characteristics and dynamics during selective laser melting
by: Guang Yang, et al.
Published: (2025-02-01)

Effect of printing process parameters on tensile strength and wear rate of 17-4PH stainless steel deposited using SLM process
by: Priya Sahadevan, et al.
Published: (2024-08-01)

Study on the Workspace and Structural Parameter Optimum of Parallel Mechanism based on Waterwave Method
by: Xia Yongqiang, et al.
Published: (2018-01-01)

Simulations of large-scale zero boiloff, densification, and solidification of hydrogen
by: Colin P. Mahony, et al.
Published: (2025-03-01)

Directional solidification of Zn-Al-Cu eutectic alloy by the vertical Bridgman method
by: Büyük U., et al.
Published: (2015-01-01)

Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel
by: Nicolás Emanuel Tenaglia, et al.
Published: (2022-09-01)

Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel
by: N. E. Tenaglia, et al.
Published: (2022-10-01)

Analysis of the microstructural evolution and solidification behaviour of Sn-9 wt% Zn alloy with small additions of Mg
by: Figueroa I.A., et al.
Published: (2013-01-01)

A mathematical model for distribution of calcium in silicon by vacuum directional solidification
by: Zheng D., et al.
Published: (2016-01-01)

Simulation and analysis of the solidification characteristics of a Si-Mo ductile iron
by: Çelik G.A., et al.
Published: (2021-01-01)

Research on In-situ Sludge Solidification in the Ecological Refuse Landfill Closure Project
by: ZHANG Xiaoyu, et al.
Published: (2021-01-01)

A novel model of the cross-section variation effect induced by contraction convection on freckle defects in directional solidification
by: Yang Liu, et al.
Published: (2025-03-01)

Size Optimization Design of 3T1R Parallel Mechanism based on Workspace
by: Liu Zhenkun, et al.
Published: (2018-01-01)

Numerical Simulation Study on Directional Solidification of DD5 Nickel-Based Single-Crystal Turbine Blades
by: Jianhui Wei, et al.
Published: (2024-12-01)

Solidification characteristics of atomized AlCu4Mg1-SiC composite powders
by: Yamanoglu R., et al.
Published: (2012-01-01)

Stabilization and Solidification of Produced Tailings in the Lead Extraction Process Using Brine Leaching Method
by: Ravanbakhsh Shirdam, et al.
Published: (2024-10-01)

Basic principles of the continuous casting technology development for machine‑building blanks
by: E. B. Demchenko, et al.
Published: (2022-10-01)

Effect of casting and rolling process parameters on solidification welding line of magnesium alloy
by: Huang Z. -Q., et al.
Published: (2022-01-01)

Investigation of magnesium phosphate cement on river dredged sludge with varying humic acid content and solidification mechanism
by: Xiaoyi Yuan, et al.
Published: (2025-01-01)

Kinematics Analysis and Parameter Optimization of a Novel 3T1R Parallel Robot Mechanism
by: Huajuan Xu, et al.
Published: (2021-05-01)

Kinetics of Solidification and Crystallization of Liquid Axial Zone of Fe-C Alloys in Cylindrical Molds
by: V. Khrychikov, et al.
Published: (2024-12-01)

Influence of laser power on microstructure and performance of SiC/Ti composite fabricated through selective laser melting
by: Jun Fang, et al.
Published: (2025-01-01)

Solidification of Fe19Cr2.9C2V alloy
by: Filipović Mirjana, et al.
Published: (2014-01-01)

Ag–Cu solid–liquid interface velocity and growth morphology dependence on material data variations under rapid solidification conditions
by: D. Cietek, et al.
Published: (2025-12-01)

Transient heat transfer and solidification modelling in direct-chill casting using a generalized finite differences method
by: Saucedo-Zendejo F.R., et al.
Published: (2019-01-01)