Research of Measurement Technology of 3D Tooth Surface Error of Non-circular Gear
In order to improve the measurement accuracy of non-circular gears, a three-dimensional measurement method for non-circular gear tooth surfaces is proposed. According to the basic meshing principle of the non-circular gear, the tooth surface model of the non-circular gear is established, and the thr...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | zho |
| Published: |
Editorial Office of Journal of Mechanical Transmission
2019-08-01
|
| Series: | Jixie chuandong |
| Subjects: | |
| Online Access: | http://www.jxcd.net.cn/thesisDetails#10.16578/j.issn.1004.2539.2019.08.009 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | In order to improve the measurement accuracy of non-circular gears, a three-dimensional measurement method for non-circular gear tooth surfaces is proposed. According to the basic meshing principle of the non-circular gear, the tooth surface model of the non-circular gear is established, and the three-dimensional solid modeling of the non-circular gear is completed. In order to reflect the geometry information of the tooth surface more realistically, a method of sampling the tooth surface with equal arc length by using the intersection line is proposed, and the non-circular gear tooth surface is meshed. Taking the elliptical gear as an example, the three-dimensional solid model of the non-circular gear is obtained by Einscan-SP scanner. The Geomagic Qualify software is used to align the solid model with the theoretical model, and the aligned tooth flanks are meshed to obtain the three-dimensional error value of the tooth surface of non-circular gear. This method eliminates the influence of the two-dimensional positioning error on the measurement accuracy and improves the measurement accuracy of the non-circular gear. |
|---|---|
| ISSN: | 1004-2539 |