The Influence of Carriers During the Drying of Honey with a Spray Dryer
The aim of this study explores the impact of different carrier agents, including Maltodextrin, Dextrin, Gum Arabic, and N-Zorbit, on the spray drying process of honey. The drying was conducted under controlled conditions with an inlet temperature of 215°C, an outlet temperature of 95°C, a disc atomi...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2025-01-01
|
| Series: | BIO Web of Conferences |
| Online Access: | https://www.bio-conferences.org/articles/bioconf/pdf/2025/21/bioconf_foset2025_01019.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The aim of this study explores the impact of different carrier agents, including Maltodextrin, Dextrin, Gum Arabic, and N-Zorbit, on the spray drying process of honey. The drying was conducted under controlled conditions with an inlet temperature of 215°C, an outlet temperature of 95°C, a disc atomizer rotational speed of 22,000 rpm, and a feed rate of 2.8 mL/s. Honey solutions (50% and 60%) were combined with varying concentrations of carrier agents (10–25% MD, 30–40% GA, 10% DX, and 10% NZ) before being subjected to drying. The obtained powders were analyzed for their structural integrity, flow characteristics, and sugars composition. Results indicated that Gum Arabic provided the highest powder recovery, whereas Maltodextrin, Dextrin, and N-Zorbit enhanced flow performance but exhibited increased adhesion to the drying chamber. Additionally, processing conditions played a key role in defining the final product properties, highlighting the importance of optimizing formulation and drying parameters for improved efficiency and stability. |
|---|---|
| ISSN: | 2117-4458 |