New Insights into Cement-Soil Mixtures with the Addition of Fluidized Bed Furnace Bottom Ashes
This research is the result of work on implementing a closed-loop economy in geotechnics, which aligns with the broader concept of a circular economy in construction by promoting the use of waste materials and reducing environmental impact. The research presented in the article focuses on the use of...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2024-12-01
|
| Series: | Applied Sciences |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2076-3417/14/24/11878 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This research is the result of work on implementing a closed-loop economy in geotechnics, which aligns with the broader concept of a circular economy in construction by promoting the use of waste materials and reducing environmental impact. The research presented in the article focuses on the use of fluidized bed furnace bottom ashes, a by-product of coal combustion in fluidized bed boilers, in the production of cement-soil jet grouting slabs. Samples were analyzed for their structural and mechanical properties to assess their suitability for geotechnical applications. The mixtures were distinguished between those using CEM I and those using CEM II. Mixes based on two types of cements had an additional division based on the amount of additives: reference mix, 5% ash, 15% ash, and 10% ash + 5% microsilica. The conducted experiments aim to determine the physico-mechanical parameters of the new mixtures, highlighting the potential of these materials in mining and geotechnical technologies. The research took into account the impact of time over a period of two years for mortars and 28 days for cement-soil. The authors’ studies included determining the compressive strength, bending strength, and imaging using computed tomography. Computed tomography allowed imaging of the internal structure and porosity analysis. Employing CEM II as the primary binding material slows early strength gain, but adding microsilica significantly enhances strength, compaction, and durability. Despite improved properties, CT imaging revealed increased cracking in mixtures with CEM II, indicating reduced water tightness and highlighting areas for further study. |
|---|---|
| ISSN: | 2076-3417 |