Influence of washing on the adhesion between 3D-printed TPU and woven fabrics
3D printing on textile fabrics can be used to create composites with position-dependent mechanical, water-resistant, magnetic or other properties. An important prerequisite to use such composites technologically or for design purposes is a sufficient adhesion between both materials. While previous s...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
PUBLIA – SLUB Open Publishing
2021-06-01
|
| Series: | Communications in Development and Assembling of Textile Products |
| Subjects: | |
| Online Access: | https://journals.qucosa.de/cdatp/article/view/39 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | 3D printing on textile fabrics can be used to create composites with position-dependent mechanical, water-resistant, magnetic or other properties. An important prerequisite to use such composites technologically or for design purposes is a sufficient adhesion between both materials. While previous studies revealed that soft, elastic printing polymers were advantageous to prepare connections with a high adhesion, not much research has been performed yet on the dependence of the adhesion on textile fabric structure, heat post-treatment, and the influence of washing, which is necessary for most applications of such composites. Here we investigate composites from thermoplastic polyurethane (TPU) 3D-printed on two different woven cotton fabrics. Besides the expected strong correlation of the adhesion with the distance between nozzle and printing bed, we find a higher adhesion on the thinner fabric and an increase in the adhesion after one washing cycle. |
|---|---|
| ISSN: | 2701-939X |