Failure Behavior in Mechanical Testing of Two Plywood Products Distributed in Korea

Failure Behavior in Mechanical Testing of Two Plywood Products Distributed in Korea

The structural performance was tested for two plywood products distributed in South Korea: Plywood for roof (RP) and plywood for concrete form (CP), in accordance with ASTM standards. The evaluation included tests for tensile-shear strength under wet conditions, bending performance, compressive stre...

Full description

Saved in:

Bibliographic Details
Main Authors:	In-Hwan Lee, Min Lee, Eun-Chang Kang, Yonggun Park, Sang-Min Lee
Format:	Article
Language:	English
Published:	North Carolina State University 2024-11-01
Series:	BioResources
Subjects:	bending performance compression strength mor moe shear strength plywood for concrete form plywood for roof rolling shear strength
Online Access:	https://ojs.bioresources.com/index.php/BRJ/article/view/24011
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Bonding Strength of Beech Plywood Glued with Alcohol-Soluble Phenol-Formaldehyde Resin
by: Miglena Valyova, et al.
Published: (2024-01-01)

The Potential of Light Brick from Plywood Industrial Waste as Sound-Absorbing Construction Material
by: Noer Af'idah, et al.
Published: (2024-10-01)

Sound Absorption Efficiency of Plywood-Carbon Fiber Composites: A New Frontier in Wood Material Science
by: Hamit Özyurt
Published: (2024-11-01)

Pengaruh Bentuk dan Perbedaan Kombinasi Pengikat Kayu Lamina Balau Kuning (Shorea leavis Ridl) terhadap Tingkat MoE dan MoR
by: Lusita Wardhani, et al.
Published: (2008-01-01)

Adhesion and Cohesion Performance of Polyurethane Made of Bio‐Polyol Derived from Modified Waste Cooking Oil for Exterior Grade Plywood
by: Sena Maulana, et al.
Published: (2024-12-01)

Enhancing the Performance of Layered Wood Composites Through the Non-Food Application of Dietary Fiber in Their Bonding Matrix
by: Marta Wronka, et al.
Published: (2024-12-01)

Triaxial compression and shear strength characteristics of two-stage concrete: an experimental study
by: Farzam Omidi Moaf, et al.
Published: (2024-11-01)

Research on a new adaptive roof waterproofing membrane to improve water resistance of traditional Chinese timber buildings
by: Qing Chun, et al.
Published: (2022-11-01)

Controlled low strength material modified with lignosulfonate
by: Yoon Geom Heo, et al.
Published: (2024-12-01)

Mitigating strength loss in mortar due to application delay: quantified impact of additional water and cement
by: H. M. A. Mahzuz, et al.
Published: (2025-02-01)

Experimental Study on the Strength Characteristics of Cast-In-Situ Mortar Specimens in a Slurry Environment
by: Zhijiang Yang, et al.
Published: (2024-12-01)

Long-term development of mechanical properties of concrete with different water to cement ratio and internal curing ability
by: Vlastimil Bilek, et al.
Published: (2025-01-01)

Metaheuristic optimization of extreme gradient boosting machine for enhanced prediction of lateral strength of reinforced concrete columns under cyclic loadings
by: Phu-Anh-Huy Pham, et al.
Published: (2024-12-01)

A Review on Mechanism and Influencing Factors of Shear Performance of UHPC Beams
by: Weijie Jin, et al.
Published: (2024-10-01)

Investigation of the Influence of Local Low Strength Concrete on the Bearing Capacity of Bending Reinforced Concrete Beams
by: A. G. Tamrazyan
Published: (2024-02-01)

Compressive and shear strength of coarse silt stabilized with Terramix F22.5 binder
by: Katarzyna Kamińska
Published: (2023-10-01)

Enhancing the sustainability of geotechnical engineering with utilization of fly Ash
by: Hasan Majed Alqawasmeh
Published: (2025-01-01)

A micromechanical four-phase model to predict the compressive failure surface of cement concrete
by: A. Caporale,, et al.
Published: (2014-07-01)

Short-term mechanical properties and microstructure of coastal cement soil modified by sugarcane bagasse ash
by: Liming Yao, et al.
Published: (2024-12-01)

Investigating the Shear Strength of New and Old Concrete Joints Under the Effect of Freezing and Thawing Cycles
by: Meysam Sadighi, et al.
Published: (2024-08-01)

Experimental study on the shear behaviour of high-strength lightweight concrete beams incorporating graphene oxide
by: Xiaojiang Hong, et al.
Published: (2024-11-01)

Quasi-static puncture shear loading characteristics of GLARE/nanoclay laminates with various indenters
by: Thiyagu Murgaiyan, et al.
Published: (2024-12-01)

Evaluation of sandy soil stabilized with Tragacanth gum biopolymer for geotechnical applications
by: Alireza Tabarsa, et al.
Published: (2024-12-01)

Effect of Traffic Vibration on Compressive Strength of High-Strength Concrete and Tensile Strength of New-to-Old Concrete Interfaces
by: Pingping Gu, et al.
Published: (2024-11-01)

Experimental and Numerical Study of Mechanical Properties of Concrete Containing Biochar
by: S.O Odeyemi, et al.
Published: (2024-06-01)

Investigation the Effect of Strengthening Various Subpanels in the SPSPs with Two Rectangular Openings
by: Saeid Sabouri-Ghomi, et al.
Published: (2021-10-01)

Mechanical properties and microstructural analysis of laterite stone masonry from India for sustainable construction
by: Dhanalakshmi Kiran Bhat, et al.
Published: (2024-12-01)

Strength Comparison of Unreinforced Masonry Wall Made of Different Types of Brick
by: Mohammad Rafiqul Islam, et al.
Published: (2023-11-01)

Research of the Calculation Method of Bending Strength of Non-orthogonal Helical Face Gear
by: Derun Qin, et al.
Published: (2020-01-01)

EXPERIMENTAL STUDY ON TENSILE PROPERTIES OF HUCK RIVET JOINT
by: ZHANG XiangFeng, et al.
Published: (2018-01-01)

Using Granular Waste Tire as a Factor to Increase Shear Strength of Cohesionless Soils
by: Koray Aktürk, et al.
Published: (2021-06-01)

The impact of temperature on the shear bond strength of conventional multi-step and self-adhesive orthodontic adhesive systems: an in-vitro study
by: Grėtė Kazlauskaitė, et al.
Published: (2025-02-01)

Effect of green tea and sodium ascorbate on the shear bond strength of orthodontic brackets bonded on bleached enamel: An in-vitro study
by: Sakshi Tiwari, et al.
Published: (2022-01-01)

Sustainable utilization of feldspar powder from lithium extraction byproducts as road construction material
by: Bowen Guan, et al.
Published: (2024-12-01)

Study The Re-Use of Construction and Demolition Waste for Friendlier Environment: Waste Concrete and Waste Granite Aggregates
by: Mousa Hawraa Hasan, et al.
Published: (2024-12-01)

Bending technology of high strength steel sheets and tools for its realization
by: V. A. Tаmilа, et al.
Published: (2020-04-01)

The Temperature-Dependent Monotonic Mechanical Characteristics of Marine Sand–Geomembrane Interfaces
by: Zhiming Chao, et al.
Published: (2024-11-01)

HIGH STRENGTH CONCRETES BASED ON THE CHOICE OF THE BEST PARTICLE SIZE DISTRIBUTION IN AGGREGATE
by: Zoran Grdić, et al.
Published: (2024-09-01)

Effect of Recycled Aggregates on Physical and Mechanical Performance of Green Concrete Mix
by: Abdul Hafeez Buller, et al.
Published: (2025-01-01)

Experimental Study on Mechanical Properties and Stability of Marine Dredged Mud with Improvement by Waste Steel Slag
by: Qiaoling Ji, et al.
Published: (2024-10-01)