Development of the wave method of calculation operational parameters of a double-circuit power transmission line with known values of output voltages and currents at the end of the line
Electrical energy from the place of its generation is transmitted to consumers of various capacities. The distance from the source of electrical energy to the consumer can vary from several meters to several thousand kilometers. In this regard, the accurate determination of the operating parameters...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Kazan State Power Engineering University
2019-11-01
|
| Series: | Известия высших учебных заведений: Проблемы энергетики |
| Subjects: | |
| Online Access: | https://www.energyret.ru/jour/article/view/1058 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Electrical energy from the place of its generation is transmitted to consumers of various capacities. The distance from the source of electrical energy to the consumer can vary from several meters to several thousand kilometers. In this regard, the accurate determination of the operating parameters of the power transmission line (PTL) is a mandatory and necessary condition for the PTL normal functioning. In the current-carrying parts of the double-circuit PTL there are six incident and six reflected waves of the electromagnetic field. They determine voltages and currents. A scheme is proposed for the distribution of these waves along linear wires of a homogeneous section of a double-circuit PTL. This scheme shows that the current-carrying parts of the adjacent wires have a significant impact on voltages and currents in one wire. This scheme illustrates the distribution of the amplitude values of electromagnetic field waves, defined as the integration constant. Using the integration constants, the propagation constants of electromagnetic waves along the linear wires of the PTL and the corresponding wave impedances, one can obtain the amplitude values of the incident and reflected waves at any point of the double- circuit PTL, and hence the currents and voltages in the double-circuit PTL. The article presents a method for determining the currents and voltages in a double-circuit PTL according to the load. The proposed method will allow determining the qualitative and quantitative indicators of electrical energy (induced voltage) appearing from each wire separately and provide the possibility of their elimination, which will improve the quality of electrical energy. |
|---|---|
| ISSN: | 1998-9903 |