Fault Diagnosis Method for Rolling Bearing based on Least Squares Mapping and SVM
Aiming at the problem of extraction difficulty of early non-stationary weak fault signal feature,low resolution of characteristic parameter,early fault diagnosis difficult exist in the rolling bearing fault diagnosis,a fault diagnosis method based on least squares mapping（LSM） fault characteristic p...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | zho |
| Published: |
Editorial Office of Journal of Mechanical Transmission
2017-01-01
|
| Series: | Jixie chuandong |
| Subjects: | |
| Online Access: | http://www.jxcd.net.cn/thesisDetails#10.16578/j.issn.1004.2539.2017.02.035 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Aiming at the problem of extraction difficulty of early non-stationary weak fault signal feature,low resolution of characteristic parameter,early fault diagnosis difficult exist in the rolling bearing fault diagnosis,a fault diagnosis method based on least squares mapping（LSM） fault characteristic parameter optimization and support vector machine（SVM） is proposed.Firstly,the non-dimensional symptom parameters（NSPs） in the time domain can reflect the features of the vibration signals measured in each state are calculated.Then,the high sensitivity symptom parameters are built by optimizing the calculated non-dimensional symptom parameters（NSPs） in the time domain with the LSM theory.Finally,the symptom parameters selecting by sensitivity identification factor are input to the SVM for the fault diagnosis,the fault type of bearing is identified through the sequential inference diagnosis.The practical examples of fault diagnosis for a motor bearing are shown to verify that the method is effective. |
|---|---|
| ISSN: | 1004-2539 |