Enhancing Li-ion battery anode performances via Li1.5Al0.5Ti1.5(PO4)3 coated Li1.2Mn0.54Ni0.13Co0.13O2 cathode
Abstract The material Li1.5Al0.5Ti1.5(PO4)3 is a lithium fast ion conductor with three-dimensional ion channels. It exhibits high ionic conductivity, with lithium ion conductivity. To prevent long-term direct contact between Li1.2Mn0.54Ni0.13Co0.13O2 material and electrolyte, and avoid HF corrosion...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Nature Portfolio
2025-07-01
|
| Series: | Scientific Reports |
| Subjects: | |
| Online Access: | https://doi.org/10.1038/s41598-025-11331-0 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Abstract The material Li1.5Al0.5Ti1.5(PO4)3 is a lithium fast ion conductor with three-dimensional ion channels. It exhibits high ionic conductivity, with lithium ion conductivity. To prevent long-term direct contact between Li1.2Mn0.54Ni0.13Co0.13O2 material and electrolyte, and avoid HF corrosion of the electrode produced by the decomposition of the electrolyte. A three-dimensional skeleton lithium fast ion conductor Li1.5Al0.5Ti1.5(PO4)3 coating layer was successfully synthesized on the surface of the lithium-rich manganese-based positive electrode material Li1.2Mn0.54Ni0.13Co0.13O2. The experimental results show that the Li1.2Mn0.54Ni0.13Co0.13O2@Li1.5Al0.5Ti1.5(PO4)3 composite material with a coating amount of 3% has the highest capacity retention rate after 100 cycles. The capacity retention rate reaches 85.9% after 100 cycles at 0.1 C, which is better than the 82.14% of the base material. It proves that the Li1.5Al0.5Ti1.5(PO4)3 coating layer effectively prevents the occurrence of side reactions during long cycles, stabilizes the electrode surface structure, and reduces capacity loss. |
|---|---|
| ISSN: | 2045-2322 |