Numerical and experimental investigation of heat transfer in a dimpled and petaled array tube with a coiled twisted tape and SiC nanofluid

Numerical and experimental investigation of heat transfer in a dimpled and petaled array tube with a coiled twisted tape and SiC nanofluid

Thermal efficiency challenges are common in absorber tube designs. This study proposes an innovative absorber tube featuring dimples and petal arrays on its surface, integrated with a coiled twisted tape, and circulating a 0.9 % volume concentration of silicon carbide (SiC)-enhanced nanofluid. Fixin...

Full description

Saved in:
Bibliographic Details
Main Authors: Hariam Luqman Azeez, Adnan Ibrahim, Banw Omer Ahmed, Sharul Sham Dol, Ali H.A. Al-Waeli, Mahmoud Jaber
Format: Article
Language:English
Published: Elsevier 2025-08-01
Series:Case Studies in Thermal Engineering
Subjects:
Dimple and petal arrays
Silicon carbide enhanced nanofluid
Coiled twisted tape
CFD
THPF
Online Access:http://www.sciencedirect.com/science/article/pii/S2214157X25006094
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Thermal efficiency challenges are common in absorber tube designs. This study proposes an innovative absorber tube featuring dimples and petal arrays on its surface, integrated with a coiled twisted tape, and circulating a 0.9 % volume concentration of silicon carbide (SiC)-enhanced nanofluid. Fixing heat flux at 1000 W/m2 and Reynold number between 720 and 5030, Computational Fluid Dynamics (CFD) was employed to optimize key dimple parameters, encompassing dimple lines number (ranging from 2 to 6), dimple diameter (1–5 mm), dimple height (0.8–2 mm), and dimple pitch distance (10–30 mm). Additionally, Thermohydraulic Performance Factor (THPF) assessment was conducted experimentally to examine the impact of petal arrays, coil, twisted tape, and three concentrations of SiC-enhanced nanofluid on the optimized dimple tube. The results indicate that a configuration with five dimple lines, a dimple diameter of 3 mm, a dimple height of 1.4 mm, and a dimple pitch distance of 10 mm provides optimal heat transfer augmentation. Furthermore, incorporating 0.9 % SiC with a coiled twisted tape into the optimized dimpled and petaled array tube design enhances the THPF by 71.1 %, demonstrating a substantial improvement in thermohydraulic performance.
ISSN:2214-157X

Similar Items