Disorders of magnesium alloy injection molding
The feed problems in the injection molding of different magnesium alloys were investigated and explained. The examinations carried out with magnesium alloys AZ91D, ZC63 and MRI230D have shown that in addition to the known causes, other factors can also affect the draw-in disturbance. Those are follo...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Engineering Society for Corrosion, Belgrade, Serbia
2022-03-01
|
| Series: | Zaštita Materijala |
| Subjects: | |
| Online Access: | https://www.zastita-materijala.org/index.php/home/article/view/193 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The feed problems in the injection molding of different magnesium alloys were investigated and explained. The examinations carried out with magnesium alloys AZ91D, ZC63 and MRI230D have shown that in addition to the known causes, other factors can also affect the draw-in disturbance. Those are following: a contaminated granulate, the unevenness and size of fine particles, a low melting eutectic and the bevels that are used to reinforce magnesium alloys. The causes of disturbance factors that occur were analyzed and solutions were developed to eliminate and avoid them. |
|---|---|
| ISSN: | 0351-9465 2466-2585 |