Electrodeposition of Cu Sn alloy coatings with enhanced corrosion resistance durability and self cleaning properties
Abstract In this study, a Cu-Sn superhydrophobic coating was fabricated on the surface of X70 steel via the electrodeposition method, resulting in an optimal contact angle of 164.2 ± 1.2°. Compared to the X70 substrate, the Cu-Sn coating exhibits superior corrosion resistance. In a 3.5 wt% NaCl solu...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Nature Portfolio
2025-04-01
|
| Series: | Scientific Reports |
| Subjects: | |
| Online Access: | https://doi.org/10.1038/s41598-025-97335-2 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Abstract In this study, a Cu-Sn superhydrophobic coating was fabricated on the surface of X70 steel via the electrodeposition method, resulting in an optimal contact angle of 164.2 ± 1.2°. Compared to the X70 substrate, the Cu-Sn coating exhibits superior corrosion resistance. In a 3.5 wt% NaCl solution, the polarization resistance (R p ) is 71,037 Ω·cm2, approximately 48 times higher than the substrate; the corrosion current (I corr ) is 2.23 × 10− 7 A/cm2, roughly two orders of magnitude lower than that of the substrate. This enhancement is attributed to the addition of Sn, which combines with Cu to form a Cu-Sn alloy with a micro-nano structure, effectively improving the hydrophobicity and corrosion resistance of the coating. However, excessive SnSO4 can hinder the formation of the micro-nano structure, leading to aggregation on the coating surface. In addition, the coating exhibits excellent self-cleaning properties and mechanical stability. After undergoing rigorous mechanical stability tests, including tape peeling, sandpaper abrasion, water drop impact, and sand erosion, the contact angle remains above 155°. These results are significant for addressing the issue of long-term durability and stability of superhydrophobic coatings in industrial applications and provide new prospects for the deposition of metals or alloys. |
|---|---|
| ISSN: | 2045-2322 |