Investigation of mechanical properties of AlSi3Cr alloy
In the present paper, microstructural and mechanical properties of an innovative AlSi3Mg alloy were studied. Particularly, the effect of the addition of Cr and Mn on tensile strength and impact toughness was evaluated. In fact, the presence of these elements leads to the formation of an intermetalli...
Saved in:
Main Authors: | Marialaura Tocci, Annalisa Pola, Lorenzo Montesano, G. Marina La Vecchia, Mattia Merlin, Gian Luca Garagnani |
---|---|
Format: | Article |
Language: | English |
Published: |
Gruppo Italiano Frattura
2017-09-01
|
Series: | Fracture and Structural Integrity |
Subjects: | |
Online Access: | https://www.fracturae.com/index.php/fis/article/view/1956 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Impact behavior of gravity cast AlSi10Mg alloy: Effect of hot isostatic pressing and innovative high pressure T6 heat treatment
by: Luca Girelli, et al.
Published: (2023-03-01) -
Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS
by: Annalisa Pola, et al.
Published: (2019-06-01) -
Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS
by: Annalisa Pola, et al.
Published: (2019-07-01) -
Evaluation of cavitation erosion resistance of Al-Si casting alloys: effect of eutectic and intermetallic phases
by: Marialaura Tocci, et al.
Published: (2018-01-01) -
Evaluation of cavitation erosion resistance of Al-Si casting alloys: effect of eutectic and intermetallic phases
by: Marialaura Tocci, et al.
Published: (2017-12-01)