(Co,Mn)3O4 Spinel Coating for Protecting Metallic Interconnects Thermally Converted from an Electro-Codeposited Co-Mn3O4 Composite Coating
Electro-codeposition was used to prepare the Co and Co-Mn3O4 precursor coatings on ferritic stainless steel E-brite. Plated samples were exposed at 800°C in air for different durations (i.e., 10 min and 4 h) for thermal conversion of the deposited layer to a spinel coating. The converted layer was c...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wiley
2018-01-01
|
| Series: | Advances in Materials Science and Engineering |
| Online Access: | http://dx.doi.org/10.1155/2018/9691856 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Electro-codeposition was used to prepare the Co and Co-Mn3O4 precursor coatings on ferritic stainless steel E-brite. Plated samples were exposed at 800°C in air for different durations (i.e., 10 min and 4 h) for thermal conversion of the deposited layer to a spinel coating. The converted layer was characterized with scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS) and X-ray diffraction (XRD). The results showed that after 10 min heat treatment, the plated Co layer was not fully oxidized and converted into a double-layer microstructure with an inner CoO layer and outer Co3O4 layer, while for the Co-Mn3O4 layer, the Mn3O4 particles were not completely dissolved into the oxide layer. After 4 h of exposure, the surface layer was fully converted into the Co3O4 or (Co,Mn)3O4 spinel coating. Though the Mn content in (Co,Mn)3O4 was relatively low, the Mn-doped spinel coating was advantageous over the pure cobalt spinel coating, as the thermally grown Cr2O3 scale at the coating/substrate interface was more compact and protective. Co diffusion from the deposited layer into the alloy substrate was observed for both coatings. |
|---|---|
| ISSN: | 1687-8434 1687-8442 |