Deformation of Structural Elements Made of Alloys with Reduced Resistance to Creep in Shear Direction
Numerical simulations demonstrated that cross-section deplanation occurs during the torsion of circular rods cut in the longitudinal direction of the plate made of an alloy with the reduced resistance to creep in the direction under 45◦ to the normal direction of the plate. In experiments, this is...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Kazan Federal University
2015-09-01
|
| Series: | Учёные записки Казанского университета: Серия Физико-математические науки |
| Subjects: | |
| Online Access: | https://kpfu.ru/portal/docs/F1455250134/157_3_phys_mat_3.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Numerical simulations demonstrated that cross-section deplanation occurs during the torsion of circular rods cut in the longitudinal direction of the plate made of an alloy
with the reduced resistance to creep in the direction under 45◦ to the normal direction of the plate. In experiments, this is visually confirmed by the appearance of spiral lines on the samples. The results of calculation reveal insignificant influence of the reduced resistance to creep in the transverse shear direction on the process of torsion of the plates. However, the process of torsion is accelerated for ribbed plates with increased thickness and rib height compared to the calculation in isotropic formulation. |
|---|---|
| ISSN: | 2541-7746 2500-2198 |